The arm can be moved back and forth, up and down

In a typical low-position setting with conventional tripod, the camera is set in the center position of the tripod, so the distance between the camera and the subject is far away. However, when you attach the Sliding Arm II, you can move the camera position closer to the subject.

Set the camera to even lower position
Sliding Arm II allows to set the camera to a position even lower than the conventional low position setting.

Balance weight hook for safety

It is equipped with a weight hook at the opposite end of the arm. If you hang the bag or any, using a commercially available carabiner, it can be used it as a counter weight. The counter balance prevents the tripod from falling over because the center of gravity of the camera shifts greatly from the center of the tripod.

Set the camera for “bird’s eye view”

Take a “bird’s-eye view” picture from directly above through the table.